Careers

People are our most valuable asset at AppoTech. We need your help to deliver on our mission: To develop cost-effective, high-performance, reliable products and provide service to our customers. We invite you to be part of our team and bring us success. AppoTech offers an attractive compensation package to the right candidates.

Please visit the following sections for more detail:
Hong Kong
USA
Canada
PRC

Hong Kong (Interested parties please send your resume to jobs@appotech.com.)

IC Design Engineer (Analog)
  • Design of embedded analog/mixed-signal IC circuits for 8-bit/32-bit Microcontroller (MCU) or Systems-on-a-Chip (SoC).
  • The job includes detailed circuit design and analysis, schematic capture and layout, circuit simulation, behavior modeling (C++, Matlab, Verilog), IC testing and debugging
  • Work in Hong Kong
  • BSEE/MSEE
  • Knowledge of engineering fundamentals especially in Deep Submicron CMOS technologies
  • Knowledge of analog circuit design and analysis (Op-Amp, references, pll, adc, dac)
  • Knowledge of MOS device modeling and noise analysis
  • Hands-on IC layout skills and IC measurement skills
  • Familiar in any of the following analog design areas
    • DC-DC converter / LDO topologies
    • High resolution delta sigma ADC / DAC
    • Audio Class AB / D amplifier
    • SRAM / OTP / Flash memory
    • GHz wireless transceiver
IC Design Engineer (Digital)
  • Participate in digital IP development/evaluation and SOC integration.
  • Protocol specification study, signal processing algorithm analysis, design prototyping and IC implementation.
  • Working full ASIC design cycle from design, RTL coding, verification, synthesis, timing closure, DFT, backend support and silicon bring-up.
  • Participate in System level IP development/evaluation and SOC integration.
  • System level IC development, specification study, signal processing analysis and IC
  • BSEE/MSEE
  • Knowledge in ASIC/FPGA design methodology
  • In-depth knowledge in system level design methodology and embedded processors (ARM/MIPS/DSP) MMU/caching, buses (AMBA)
  • Knowledge in High Speed Serial Data Link, eg. USB, SATA, Ethernet, PCIe is a plus
  • Knowledge of both front-end, analog and backend flow is an advance.
  • Knowledge in OS (Linux) virtual memory/threading/power management is a plus
  • Experience in image, video or audio signal processing system implementation on DSP or RISC processors, especially with detailed level knowledge of video codecs, e.g. MPEG-4/H.264/VC-1 is an advance
  • Able to code in 'C' and Verilog RTL
Application Engineer
  • Design and develop application software(Android/IOS/Windows)
  • Follow up product development in Bluetooth, Battery Pack and IOT related, etc.
  • Develop tool chains and SDK for New Product Introductions.
  • Documentation like product user guide and product specifications
  • Degree holder in Electronic Engineering, Computer Engineering or similar discipline
  • At least 1 year software development experience, preferably with experience in developing iPhone/ Android applications is preferred, fresh graduates are welcome
  • Proficient in JAVA, Objective C, C/C++ and any other related platform/tools
  • Knowledge in development of Audio, Bluetooth and PC peripherals related software are advantageous
  • Self-motivated, well-organized, independent and excellent interpersonal and communication skills
  • Excellent troubleshooting and problem solving skills with smart common sense
  • Fluent in spoken and written English, Mandarin and Cantonese
  • Working location based in HK but travelling to Shenzhen and Taiwan is necessary
Management Trainee
  • Report to the CEO
  • On-job training in multiple functional areas to acquire skills and techniques of business projects and daily operations
  • Ad hoc duties / projects assigned
  • Bachelor degree in any discipline
  • Proficiency in PC applications including MS Word, Excel, PowerPoint and Chinese word processing
  • Excellent communication and interpersonal skills
  • Fluent in both written and spoken Chinese (including Mandarin) and English
  • Mature, proactive, energetic, responsible, detail-minded, positive mindset and pleasant
  • Well organized and able to work independently
IC Layout Engineer
  • Perform custom IC layout using Cadence software
  • Duties include cell layout, layout verification, and all similar layout design functions
  • Responsible for layout verification, debugging and layout optimization
  • Diploma or above in Electronics or above with good academic result in circuit theories
  • Knowledge in CMOS IC layout
  • Knowledge in CMOS device, fabrication process and electronic theories
  • Able to read circuit schematics independently
  • some basic knowlegde in special analog layout skill such as ESD, Latch-up, matcng would be a plus
  • Some basic IC design knowledge would be a plus.

USA (Interested parties please send your resume to hr@appotech.com.)

IC Design Engineer
  • Design of embedded 2.4G RF analog/mixed-signal IC circuits or high speed Serdes design for 8-bit/32-bit Microcontroller (MCU) or Systems-on-a-Chip (SoC);
  • The job includes detailed circuit design and analysis, schematic capture and layout, circuit simulation, behavior modeling (C++, Matlab, Verilog), IC testing and debugging;
  • Bachelor or Master in Electronic Engineering;
  • At least 2 years relevant working in RF analog IC or high Speed Serdes design experience;
  • Knowledge of engineering fundamentals especially in Deep Submicron CMOS technologies;
  • Knowledge of MOS device modeling and noise analysis;
  • Hands-on IC layout skills and IC measurement skills;
  • Familiar in any of the following analog design areas:
    • GHz wireless transceiver design
    • GHz wireline/wireless PLL/Synthesizer design
    • GHz Hi-speed wireline PHY (Especially series link transceiver design, high speed SYNZ design, CDR design)

Canada (Interested parties please send your resume to recruit@appotech.com.)

Senior Analog IC Design Engineer (RF)
  • Design of embedded 2.4G RF analog/mixed-signal IC circuits for 8-bit/32-bit Microcontroller (MCU) or Systems-on-a-Chip (SoC);
  • The job includes detailed circuit design and analysis, schematic capture and layout, circuit simulation, behavior modeling (C++, Matlab, Verilog), IC testing and debugging;
  • Master or above in Electronic Engineering;
  • At least 2 years relevant working in RF analog IC design experience;
  • Knowledge of engineering fundamentals especially in Deep Submicron CMOS technologies;
  • Knowledge of MOS device modeling and noise analysis;
  • Hands-on IC layout skills and IC measurement skills;
  • Familiar in any of the following analog design areas:
    • GHz wireless transceiver design
    • GHz PLL/Synthesizer design
Senior Analog IC Design Engineer (Serdes)
  • Design of embedded analog/mixed-signal IC circuits for 8-bit/32-bit Microcontroller (MCU) or Systems-on-a-Chip (SoC);
  • The job includes detailed circuit design and analysis, schematic capture and layout, circuit simulation, behavior modeling (C++, Matlab, Verilog), IC testing and debugging;
  • Master or above in Electronic Engineering with at least 3 years relevant working experience;
  • Knowledge of engineering fundamentals especially in Deep Submicron CMOS technologies;
  • Knowledge of high speed Seres analog circuit design and analysis;
  • Knowledge of MOS device modeling and noise analysis;
  • Hands-on IC layout skills and IC measurement skills;
  • Familiar in any of the following analog design areas:
    • GHz Hi-speed wireline PHY (Especially series link transceiver design, high speed SYNZ design, CDR design)
    • Advantage with project experience related to USB3.0/SATA3.0/PCIe/HDMI
Senior IC Design Engineer (Digital / Logic IC Design)
  • Participate in digital IP development/evaluation and SOC integration;
  • Protocol specification study, signal processing algorithm analysis, design prototyping and IC implementation;
  • Working full ASIC design cycle from design, RTL coding, verification, synthesis, timing closure, DFT, backend support and silicon bring-up;
  • MSEE with at least 3 years related working experience;
  • Knowledge in ASIC/FPGA design methodology;
  • In-depth knowledge in system level design methodology and embedded processors (ARM/MIPS/DSP) MMU/caching, buses (AMBA);
  • Knowledge in High Speed Serial Data Link, eg. USB, SATA, Ethernet, PCIe is a plus;
  • Knowledge in logic RF design, eg. WIFI, Bluetooth is a plus;
  • Knowledge of both front-end, analog and backend flow is an advance;
  • Knowledge in OS (Linux) virtual memory/threading/power management is a plus;
  • Able to code in 'C' and Verilog RTL;